Tooling set for making 4 oz (1/2" ID) core burning fireworks rockets. These rockets can be made with or without a clay nozzle. Not for use with girandola kits. 

Set includes:
Spindle
3 rammers

See Videos for details, information, and helpful tips.

Tooling set for making 4 oz (1/2" ID) end burning fireworks rockets. 

Set includes:
Spindle
2 rammers

See Videos for details, information, and helpful tips.

Take the guesswork out of building Girandola fireworks by using our pre-made wheels! These wheels are approximately 9" across with 8 pre-spaced driver rings, angled for optimum flight. We had our 4 oz rocket tubes made to perfectly fit these rings (see additional pictures). The wheels mount nicely and spin freely on a 1/2" dowel. 

The Super BP End Burn Rocket Set for 1 lb (.75" ID) x 7.5" L tubes features redesigned De Laval nozzle geometry and rammers marked for both short and long burning motors. The result is a motor that produces better thrust than the traditional design and can be utilized in a variety of different devices. Not only are the Super BP End Burn Tool Sets great for standalone motors, but they make excellent drivers for wheels and girandolas. Point the nozzle upward and a variety of gerbs can also be made with this tooling. 

Set includes:
Base
Removable bronze spindle, rammers, and stainless puller

Each tooling set is machined from 6061 aluminum and bronze. All bases and rammers are chemically blackened, surface hardened, marked with no-pass and swap rammer lines, and engraved with tool set name and tube length.

See Videos for details, information, and helpful tips.

Our Stinger Tooling Set is designed to work with stock NEPT tubes 1 lb (.75" ID) x 3.75" L. Drill jigs are machined from aluminum with an appropriately-sized hole positioned at the correct height and angle to drill the vent hole consistently every time. These jigs are designed to slip directly over the tube and can be use while the tube is on the spindle. A drill bit is also included with each drill jig.

Set includes:
Universal base
Removable bronze spindle, aluminum rammers, and stainless puller

Each tooling set is machined from 6061 aluminum and bronze. All bases and rammers are chemically blackened, surface hardened, marked with no-pass and swap rammer lines, and engraved with tool set name and tube length.

See Videos for details, information, and helpful tips.

When you need to measure out a small amount of composition in even amounts, this set of 5 spoons is a must. They work great for measuring out fuel increments when ramming Bottle Rockets.

Set includes:
(1) Tad (1/4 tsp)
(1) Dash (1/8 tsp)
(1) Pinch (1/16 tsp)
(1) Smidgen (1/32 tsp)
(1) Drop (1/64 tsp)

This tiny funnel helps make bottle rocket construction much easier!
It's small enough to fit inside 1/4" tubes, but large enough to allow finely ground black powder to easily pass through. 

1 Quantity = 1 Funnel

Approximate Attributes
Diameter: 1 1/4"
Height: 1 1/2"

PLEASE NOTE: These funnels are small and difficult to see. Double check your package's packing materials! 

Our Bottle Rocket Tooling set is the perfect way to beak into the fun and rewarding hobby of rocket building. You can learn and apply all the fundamentals of rocket building without great expense or risk of personal injury. The set is made up of a machined aluminum base and rammers with a sturdy stainless steel spindle for years of trouble-free use. The entire set is designed to work perfectly with our tough Bottle Rocket Tubes. Add Bottle Rocket Sticks and your order will be complete!

These are great little bottle rocket tubes!

1 Quantity = 50 tubes

Approximate Attributes
Inside Diameter: 1/4"
Length: 2"
Wall Thickness: 1/16"
Outside Diameter: 3/8"
Color: Red

PLEASE NOTE: These tubes are slightly thicker than previously; however, they still fit the same tooling (see picture).

These are great little bottle rocket tubes!

1 Quantity = 50 tubes

Approximate Attributes
Inside Diameter: 1/4"
Length: 2 1/2"
Wall Thickness: 1/16"
Outside Diameter: 3/8"
Color: Red

PLEASE NOTE: These tubes are slightly thicker than previously; however, they still fit the same tooling (see picture).

These are great little bottle rocket tubes!

1 Quantity = 50 tubes

Approximate Attributes
Inside Diameter: 1/4"
Length: 3"
Wall Thickness: 1/16"
Outside Diameter: 3/8"
Color: Red

PLEASE NOTE: These tubes are slightly thicker than previously; however, they still fit the same tooling (see picture).

Strong, lightweight bamboo sticks, perfect for small bottle rockets and visco rockets!

1 Quantity = 100 sticks

Approximate Attributes
Diameter: 1/8"
Length: 12"

No matter what size stick rocket you plan on building, these sturdy pine dowels can be cut to length and will help you launch safely!

1 Quantity = 10 sticks

Approximate Attributes
Diameter: 1/4" (square)
Length: 36"

PLEASE NOTE: This item will ship separately (via Priority Mail) from the rest of your order so PLEASE ORDER SEPARATELY, it would be much appreciated!