• Missile Parts

    BEFORE ORDERING, PLEASE SEE VIDEO BELOW

    If you're building missiles and need parts, this is where you'll find them.

    1 Quantity (each part) = 10 pieces

    PLEASE NOTE: Missile tubes and caps were specifically made to fit over and work with our 4 oz Rocket Tube (1/2" x 5" x 1/10").

    See Videos for details, information, and helpful tips.

    • $0.99
    • $3.99
     
  • Funnel (1/4")

    This tiny funnel helps make bottle rocket construction much easier!
    It's small enough to fit inside 1/4" tubes, but large enough to allow finely ground black powder to easily pass through. 

    1 Quantity = 1 Funnel

    Approximate Attributes
    Diameter: 1 1/4"
    Height: 1 1/2"

    PLEASE NOTE: These funnels are small and difficult to see. Double check your package's packing materials! 


    • $1.00
     
  • Bottle Rocket Sticks (12")

    Strong, lightweight bamboo sticks, perfect for small bottle rockets and visco rockets!

    1 Quantity = 100 sticks

    Approximate Attributes
    Diameter: 1/8"
    Length: 12"

    • $2.99
     
  • Girandola Wheel

    Take the guesswork out of building Girandola fireworks by using our pre-made wheels! These wheels are approximately 9" across with 8 pre-spaced driver rings, angled for optimum flight. We had our 4 oz rocket tubes made to perfectly fit these rings (see additional pictures). The wheels mount nicely and spin freely on a 1/2" dowel. 

    1
    • $4.99
    • 1
     
  • Tube-1 (1/4" x 2" x 1/16") - Bottle Rocket Tubes

    These are great little bottle rocket tubes!

    1 Quantity = 50 tubes

    Approximate Attributes
    Inside Diameter: 1/4"
    Length: 2"
    Wall Thickness: 1/16"
    Outside Diameter: 3/8"

    Color: Red

    PLEASE NOTE: These tubes are slightly thicker than previously; however, they still fit the same tooling (see picture).

    1
    • $5.25
    • 1
     
  • Tube-3 (1/4" x 2 1/2" x 1/16") - Bottle Rocket Tubes

    These are great little bottle rocket tubes!

    1 Quantity = 50 tubes

    Approximate Attributes
    Inside Diameter: 1/4"
    Length: 2 1/2"
    Wall Thickness: 1/16"
    Outside Diameter: 3/8"

    Color: Red

    PLEASE NOTE: These tubes are slightly thicker than previously; however, they still fit the same tooling (see picture).

    2
    • $6.49
    • 2
     
  • Tube-20 (1/4" x 3" x 1/16") - Bottle Rocket Tubes

    These are great little bottle rocket tubes!

    1 Quantity = 50 tubes

    Approximate Attributes
    Inside Diameter: 1/4"
    Length: 3"
    Wall Thickness: 1/16"
    Outside Diameter: 3/8"

    Color: Red

    PLEASE NOTE: These tubes are slightly thicker than previously; however, they still fit the same tooling (see picture).

    2
    • $6.99
    • 2
     
  • Bottle Rocket Sticks (36")

    No matter what size stick rocket you plan on building, these sturdy pine dowels can be cut to length and will help you launch safely!

    1 Quantity = 10 sticks

    Approximate Attributes
    Diameter: 1/4" (square)
    Length: 36"

    PLEASE NOTE: This item will ship separately (via Priority Mail) from the rest of your order so PLEASE ORDER SEPARATELY, it would be much appreciated!

    3
    • $9.99
    • 3
     
  • Small Measuring Spoons

    When you need to measure out a small amount of composition in even amounts, this set of 5 spoons is a must. They work great for measuring out fuel increments when ramming Bottle Rockets.

    Set includes:
    (1) Tad (1/4 tsp)

    (1) Dash (1/8 tsp)
    (1) Pinch (1/16 tsp)
    (1) Smidgen (1/32 tsp)
    (1) Drop (1/64 tsp)

    3
    • $9.99
    • 3
     
  • 1 lb Rocket Tube (3/4" x 7 1/2" x 1/8")

    New England Paper Tube parallel wound 1 lb Rocket Tubes. The best you can buy!

    1 Quantity = 10 tubes

    Exact Attributes
    Inside Diameter: 0.760"
    Length: 7.5"
    Wall Thickness: 0.120"
    Outside Diameter: 1"

    Color: Natural Brown

    3
    • $11.95
    • 3
    Out of stock
  • 4 oz Rocket Tube (1/2" x 5" x 1/10")

    New England Paper Tube parallel wound 4 oz Rocket Tubes. The best you can buy!

    1 Quantity = 25 tubes

    Exact Attributes
    Inside Diameter: 0.510"
    Length: 5"
    Wall Thickness: 0.100"
    Outside Diameter: 0.710"

    Color: Natural Brown

    3
    • $12.00
    • 3
    Out of stock
  • Solid Brass Pumps/Tooling

    This is where you'll find some individual pumps and rocket tooling that isn't pretty enough to sell at full price, but still gets the job done. 

    - Made from high-quality brass.
    - Perfect for rocket building and making stars.
    - Great durable tools for wonderful low prices!

    PLEASE NOTE: These tools may have marks and scratches. These are limited quantity items. 

    18
    • $20.85
    • $56.95
     
  • Girandola Reload Kit

    Get 3 wheels and 25 tubes at a discounted price! These wheels are approximately 9" across with 8 pre-spaced driver rings, angled for optimum flight. We had our 4 oz rocket tubes made to perfectly fit these rings (see additional pictures). The wheels mount nicely and spin freely on a 1/2" dowel. 

    Kit includes:
    (3)  9" wheels
    (1) bag of 25 qty 4 oz Rocket Tube (1/2" x 5" x 1/10")

    7
    • $22.00
    • 7
    Out of stock
  • Bottle Rocket Tooling

    Our Bottle Rocket Tooling set is the perfect way to beak into the fun and rewarding hobby of rocket building. You can learn and apply all the fundamentals of rocket building without great expense or risk of personal injury. The set is made up of a machined aluminum base and rammers with a sturdy stainless steel spindle for years of trouble-free use. The entire set is designed to work perfectly with our tough Bottle Rocket Tubes. Add Bottle Rocket Sticks and your order will be complete!

    13
    • $39.95
    • 13
     
  • 4 oz End Burner Rocket Tooling Set

    Tooling set for making 4 oz (1/2" ID) end burning fireworks rockets. 

    Set includes:
    Spindle
    2 rammers

    See Videos for details, information, and helpful tips.

    24
    • $75.00
    • 24
     
  • 4 oz Super Core Burner Rocket Tooling Set

    Tooling set for making 4 oz (1/2" ID) core burning fireworks rockets. These rockets can be made with or without a clay nozzle. Not for use with girandola kits. 

    Set includes:
    Spindle
    3 rammers

    SeVideos for details, information, and helpful tips.

    32
    • $99.00
    • 32
     
  • 1 lb Super BP End Burner Rocket Tooling Set

    The Super BP End Burn Rocket Set for 1 lb (.75" ID) x 7.5" L tubes features redesigned De Laval nozzle geometry and rammers marked for both short and long burning motors. The result is a motor that produces better thrust than the traditional design and can be utilized in a variety of different devices. Not only are the Super BP End Burn Tool Sets great for standalone motors, but they make excellent drivers for wheels and girandolas. Point the nozzle upward and a variety of gerbs can also be made with this tooling. 

    Set includes:
    Base

    Removable bronze spindle, rammers, and stainless puller

    Each tooling set is machined from 6061 aluminum and bronze. All bases and rammers are chemically blackened, surface hardened, marked with no-pass and swap rammer lines, and engraved with tool set name and tube length.

    See Videos for details, information, and helpful tips.

    42
    • $129.00
    • 42
     
  • 1 lb Super BP Core Burner Rocket Tooling Set

    The Super BP Core Burner Rocket Tooling Set for 1 lb (.75" ID) x 7.5" L tubes features modified nozzle geometry to more closely resemble a true De Laval nozzle. The end result is a more efficient rocket motor with a bit more "snort" than traditional BP rocket sets. Plus, the spindles are machined from bronze for durability and a long life. These super BP sets can also be used to produce great whistle and strobe rockets. 

    Set includes:
    Universal base
    Removable spindle, rammers, and stainless puller

    All bases and rammers are chemically blackened, surface hardened, marked with no-pass and swap rammer lines, and engraved with tool set name and tube length.

    See Videos for details, information, and helpful tips.

    45
    • $139.00
    • 45
    Out of stock
  • 1 lb Stinger Tooling Set

    Our Stinger Tooling Set is designed to work with stock NEPT tubes 1 lb (.75" ID) x 3.75" L. Drill jigs are machined from aluminum with an appropriately-sized hole positioned at the correct height and angle to drill the vent hole consistently every time. These jigs are designed to slip directly over the tube and can be use while the tube is on the spindle. A drill bit is also included with each drill jig.

    Set includes:
    Universal base
    Removable bronze spindle, aluminum rammers, and stainless puller

    Each tooling set is machined from 6061 aluminum and bronze. All bases and rammers are chemically blackened, surface hardened, marked with no-pass and swap rammer lines, and engraved with tool set name and tube length.

    See Videos for details, information, and helpful tips.

    48
    • $148.00
    • 48