-
Zip Ties
A fast, easy, inexpensive, and effective way to connect fuses. You can chain your finale or entire show together by connecting all the fuses from the fireworks to a single-length fuse. Light one fuse, then sit back and watch the show!
1 Quantity = 100 ties
-
Zip Tie Gun
Let this tool do the work for you! It precisely tightens and cuts zip ties in one easy squeeze.
6 -
WP Quickmatch/Shell Leader Piping
Create your own "quickmatch" with this high-quality, waterproof piping! Rather than a string coated with black powder, this piping contains a 4-ply string that simplifies the process of pulling your fuse (or your homemade blackmatch) through. Simply cut the length you need, run your fuse/match through, and connect your fireworks by puncturing the piping, inserting the fuse, and taping. It's that easy!
1 Quantity = approximately 150 feet
PLEASE NOTE: Until fuse is pulled through, this piping is NOT fuse!
6 -
White Safety Fuse (3/4 sec/ft)
DUE TO LIMITED SUPPLY WE ARE FORCED TO LIMIT PURCHASES TO A MAXIMUM OF
5 UNITS PER CUSTOMER.
THANK YOU FOR YOUR UNDERSTANDING."White Safety Fuse" or "Quick Fuse" as it is commonly called, is the fastest fuse you can buy, period! It burns at a blazing 3/4 second per foot! This is as close to quickmatch as you can get without needing a license. You may even be able to speed it up a little more by putting it in our WATERPROOF PIPING!
1 Quantity = 20 feet
Approximate Attributes
Diameter: 3 mm (1/8")
Burn Rate: 3/4 second/foot
Color: White4 -
USA Cannon Fuse Bumper Sticker
Check out this new USA Cannon Fuse Bumper Sticker! Matte Finish for the best quality! Now you can totally be set for the 4th of July!
Dimensions: 3" x 3"
-
UGLY HDPE Firework Mortar Tubes
Not only are these the toughest consumer fireworks mortar tubes on the market, they might be the UGLIEST! Just as high-quality as our regular HDPE tubes, only scuffed, scratched, slightly short/slanted, or otherwise not pretty enough to sell at full price.
1 Quantity = 1 DR11 firework mortar tube
Approximate Attributes
Inside Diameter: 1.91"
Length:
12" - ($1.99)
15" - ($2.25)
Wall Thickness: 1/4"
Outside Diameter: 2 3/8"
Wood Plug Thickness: 1 1/2" -
UGLY Fuse
This is where you'll find all the fuse that isn't pretty enough to sell at full price.
Like any other retailer, we at CannonFuse.com receive our fair share of products that have seen better days by the time they arrive at our door. The difference is that no matter how "ugly" our occasional "UGLY Fuse" is, it typically always burns the same, which, we know, is what most of you really care about! If you don't have a problem with cosmetic defects like discoloration, peeling, or sticking, you can snag a pretty good deal on some of our most popular types of fuses!
In addition to cosmetic issues, some of our rolls of UGLY Fuse could be of multiple lengths, be undersized, and/or have kinks or sticking in a few places. The whole roll isn't bad, just a portion of it. The bottom line is that none of it is unusable or unsafe; it's just not good enough to be sold for full price.
5 -
Tube-9 (9/16" x 3" x 1/16")
1 Quantity = 50 tubes
Approximate Attributes
Inside Diameter: 9/16"
Length: 3"
Wall Thickness: 1/16"
Outside Diameter: 11/16"
Color: Red2 -
Tube-8 (1" x 3 1/2" x 3/32")
1 Quantity = 25 tubes
Approximate Attributes
Inside Diameter: 1"
Length: 3 1/2"
Wall Thickness: 3/32"
Outside Diameter: 1 1/4"
Color: Red/White/Blue Spiral2 -
Tube-7 (1" x 2 1/2" x 3/32")
1 Quantity = 50 tubes
Approximate Attributes
Inside Diameter: 1"
Length: 2 1/2"
Wall Thickness: 3/32"
Outside Diameter: 1 1/4"
Color: Red/White/Blue Spiral3 -
Tube-6 (3/4" x 3 1/2" x 3/32")
1 Quantity = 50 tubes
Approximate Attributes
Inside Diameter: 3/4"
Length: 3 1/2"
Wall Thickness: 3/32"
Outside Diameter: 1"
Color: Red/White/Blue Spiral3 -
Tube-4 (3/4" x 2 1/8" x 3/32")
1 Quantity = 50 tubes
Approximate Attributes
Inside Diameter: 3/4"
Length: 2 1/8"
Wall Thickness: 3/32"
Outside Diameter: 1"
Color: Red/White/Blue Spiral2 -
Tube-38 (1" x 6" x 1/8")
Perfect for 37mm launcher reloads!
1 Quantity = 10 tubes
Approximate Attributes
Inside Diameter: 1"
Length: 6"
Wall Thickness: 1/8"
Outside Diameter: 1 1/4"
Color: Red1 -
Tube-37 (1" x 2 1/2" x 1/8")
Perfect for 37mm launcher reloads!
1 Quantity = 25 tubes
Approximate Attributes
Inside Diameter: 1"
Length: 2 1/2"
Wall Thickness: 1/8"
Outside Diameter: 1 5/16"
Color: Red or YellowPLEASE NOTE: These WILL NOT fit inside 1 1/4" tubes.
1 -
Tube-3 (1/4" x 2 1/2" x 1/16") - Bottle Rocket Tubes
These are great little bottle rocket tubes!
1 Quantity = 50 tubes
Approximate Attributes
Inside Diameter: 1/4"
Length: 2 1/2"
Wall Thickness: 1/16"
Outside Diameter: 3/8"
Color: RedPLEASE NOTE: These tubes are slightly thicker than previously; however, they still fit the same tooling (see picture).
2 -
Tube-20 (1/4" x 3" x 1/16") - Bottle Rocket Tubes
These are great little bottle rocket tubes!
1 Quantity = 50 tubes
Approximate Attributes
Inside Diameter: 1/4"
Length: 3"
Wall Thickness: 1/16"
Outside Diameter: 3/8"
Color: RedPLEASE NOTE: These tubes are slightly thicker than previously; however, they still fit the same tooling (see picture).
2 -
Tube-2 (9/16" x 1 1/2" x 1/16")
1 Quantity = 50 tubes
Approximate Attributes
Inside Diameter: 9/16"
Length: 1 1/2"
Wall Thickness: 1/16"
Outside Diameter: 11/16"
Color: Red1 -
Tube-13 (1 1/4" x 4" x 1/8")
1 Quantity = 25 tubes
Approximate Attributes
Inside Diameter: 1 1/4"
Length: 4"
Wall Thickness: 1/8"
Outside Diameter: 1 1/2"
Color: Red4 -
Tube-12 (1 1/4" x 6" x 3/32")
1 Quantity = 8 tubes
Approximate Attributes
Inside Diameter: 1 1/4"
Length: 6"
Wall Thickness: 3/32"
Outside Diameter: 1 1/2"
Color: Red/White/Blue Spiral1 -
Tube-11 (1" x 6" x 3/32")
1 Quantity = 10 tubes
Approximate Attributes
Inside Diameter: 1"
Length: 6"
Wall Thickness: 3/32"
Outside Diameter: 1 1/4"
Color: Red/White/Blue Spiral1 -
Tube-10 (3/4" x 6" x 3/32")
1 Quantity = 10 tubes
Approximate Attributes
Inside Diameter: 3/4"
Length: 6"
Wall Thickness: 3/32"
Outside Diameter: 1"
Color: Red/White/Blue Spiral1 -
Tube-1 (1/4" x 2" x 1/16") - Bottle Rocket Tubes
These are great little bottle rocket tubes!
1 Quantity = 50 tubes
Approximate Attributes
Inside Diameter: 1/4"
Length: 2"
Wall Thickness: 1/16"
Outside Diameter: 3/8"
Color: RedPLEASE NOTE: These tubes are slightly thicker than previously; however, they still fit the same tooling (see picture).
1 -
Tube Bases
Basic 3" x 3" black plastic bases that fit our 3/4" ID, 1" ID, and 1 1/4" ID (3/32" Wall) tubes perfectly!
1 Quantity (3/4" & 1") = 10 bases
1 Quantity (1 1/4") = 8 bases -
Trip Alarm Fuse Igniter
The Trip Alarm Fuse Igniter coupled with a coffee can, fuse, and some firecrackers is a very effective tool in a variety of situations; whether you are protecting your property from burglars, your tent site from a wandering bear, or your garden from pillaging animals.
See Videos for details, information, and helpful tips.
8 -
Talon Igniters
Talon Igniters are your safe and 100% reliable alternative to a conventional electric match. They work with virtually all firing systems and come in the following prepackaged configurations:
1 Meter - 10 igniters/pack
2 Meter - 6 igniters/pack
3 Meter - 6 igniters/pack
4 Meter - 4 igniters/pack
5 Meter - 4 igniters/packSee Videos for details, information, and helpful tips.
1 -
Star/Comet Pump Tooling
Individual pumps for stars and/or comets. Made from high-quality aircraft-grade aluminum.
18 -
Star Plates
Custom machined specifically for CannonFuse.com!
You don't use a star plate every single day, so why spend hundreds of dollars on a large-pin plate when you only need to press a few stars? Our convenient 20, 25, or 30 pin plates are compact for easy storage, and reasonably priced so they won't break the bank.Approximate Attributes
Length: 3 3/4"
Width: 2 3/4"
Height: 1 3/16" (30 pin), 1 7/16" (25 pin), 2" (20 pin)
-Aircraft-Grade aluminum base
-Stainless Steel pinsSee Videos for details, information, and helpful tips.
32 -
-
55% less
Star Plate Accessories
Get the most out of your CannonFuse.com Star Plates with these accessories, which all work universally with each star plate we offer.
Fill Plate: This tray makes filling your star plate a breeze.
HD Press Plate: This thick aluminum plate has a slight ridge around the bottom to help keep your star plate centered on it at all times.
Extraction Plate: This is perhaps the handiest of the 3 accessories. Once you have compacted and shaved your stars to the proper length, you need to extract them from your plate. This tray makes it easy and keeps your stars from rolling all over your work bench.Delrin Press Plate: This is a cheaper alternative to the aluminum press plate. Made from tough Delrin.
8 -
-
Standard Firework Mortar RACK + TUBE Packages
Save with UPS Shipping - HERE'S HOW!
All of our mortar racks are built in house right here in Montana USA. The lumber is hand-picked to ensure the highest quality. The racks are both glued and stapled for strength and reliability. You will not find a higher quality fireworks mortar rack for sale anywhere in America!
Package includes:
(1) unassembled* 30-shot fireworks mortar rack
Corresponding 30 1.91" HDPE Mortar Tubes (12" long)
Phillips-head screws
*All fireworks racks are shipped with the end plates removed for packaging. End plates are marked and pre-drilled for easy assembly. Included tubes will be loaded in the rack(s).74 -
Small Pyro Screens
Do you need high-quality plastic/stainless steel pyro screens, but don't want them taking up half your work space? Then these small, stackable screens are for you.
Approximate Attributes
Top Diameter: 5 1/2"
Bottom Diameter: 5 1/4"
Depth: 3 1/2"2 -
Small Measuring Spoons
When you need to measure out a small amount of composition in even amounts, this set of 5 spoons is a must. They work great for measuring out fuel increments when ramming Bottle Rockets.
Set includes:
(1) Tad (1/4 tsp)
(1) Dash (1/8 tsp)
(1) Pinch (1/16 tsp)
(1) Smidgen (1/32 tsp)
(1) Drop (1/64 tsp)3 -
Small Funnel Set
This set of small funnels is a must for any rocket builder!
Funnels come on a silver ball chain.Approximate Attributes
Diameter: 2" & 2 3/4"
Height: 3/17" & 4" -
Small Cannon Fuse (25 sec/ft)
"Small Cannon Fuse" works well in most small pocket cannons.
1 Quantity = 20 feet
Approximate Attributes
Diameter: 2 mm (slightly smaller than 1/16")
Burn Rate: 25 seconds/foot
Color: Medium Green1 -
Slow Cannon Fuse (30 sec/ft)
DUE TO LIMITED SUPPLY WE ARE FORCED TO LIMIT PURCHASES TO A MAXIMUM OF
5 UNITS PER CUSTOMER.
THANK YOU FOR YOUR UNDERSTANDING."Slow Cannon Fuse" is made with 24 woven cotton strings and coated with red lacquer. If you're looking for the ultimate in high-quality Chinese Visco fuse, look no further...you've found it!
1 Quantity = 20 feet
Approximate Attributes
Diameter: 3.5 mm (slightly larger than 1/8")
Burn Rate: 30 seconds/foot
Color: RedPLEASE NOTE: This fuse will NOT work with our Black Powder Cannons or FuseConneX (it is too thick).
See Videos to watch it in action.
4 -
Scorch Torch
When you need a dependable flame, these heavy duty, high-quality torches will do the trick!
Approximate Attributes & Features
Height: 6"
Color: Blue, Orange, Red, or Silver - ($26.95)
-Adjustable flame
-Safety on/off switch
-Large fuel tank
Includes instructions (on packaging) and (1) butane refill (approximately 18 ml)8 -
Saturn Missile Tubes
Molded plastic missile tubes. Select from two sizes!
Regular Jumbo 1 Quantity ≈127 tubes 61 tubes Approximate AttributesInside Diameter:3/16" 7/16" Length:2 1/4" 2" Outside Diameter:1/4" 1/2" Color:Green Red (ish) -
Rope Fuse
"Rope Fuse" is a simple type of fuse that smolders at 1-2 hours per foot, possibly making it the slowest-burning "fuse" in the world. Traditionally used at festivals or parties as a noisemaker, the fuses of dozens (or even hundreds) of small firecrackers like "Ladyfingers" are inserted into the weaves of the rope, causing the crackers to automatically ignite from every few seconds to minutes, depending on how many are used and how they are spaced.
Many Americans use rope fuse on the 4th of July as a fun way to ensure that a nice "BANG!" rings out every so often throughout the course of a party or fireworks show.
1 Quantity = 5 feet
Approximate Attributes
Diameter: 9 mm (3/8")
Burn Rate: 1-2 hours/footPLEASE NOTE: Orders of 3 or more will come as one continuous length, unless you specify otherwise (in comments during checkout).
See Videos to watch it in action.
1 -
Reinforced Kraft Paper Tape
High-grade Kraft paper tape reinforced with strong fiberglass yarns. Water-activated adhesive.
Approximate Attributes
Width: 3"
Length: 375 feet or 900 feet4 -
Pull Start Fire
Pull Start Fire makes starting your fire easier than ever before. Just follow three simple steps (instructions included on packaging), and enjoy a fire that burns for 30-40 minutes on its own, up to 2.5 times hotter than other leading brands! No matches? Wet logs? Howling winds? No problem! Pull Start Fire will work in all these conditions. Order a couple to toss in your backpack or bug out bag.
See Videos for details, information, and helpful tips.
1 -
Premium Cannon Fuse (23 sec/ft)
DUE TO LIMITED SUPPLY WE ARE FORCED TO LIMIT PURCHASES TO A MAXIMUM OF
15 UNITS PER CUSTOMER.
THANK YOU FOR YOUR UNDERSTANDING."Premium Cannon Fuse" is the mainstay of the fireworks industry, used for everything from timing individual shells to entire shows. It is also the fuse used in most hobby cannons.
1 Quantity = 20 feet
Approximate Attributes
Diameter: 3 mm (1/8")
Burn Rate: 23 seconds/foot
Color: Dark Green4 -
Pre-Cut Cannon Fuse
We offer three popular lengths of Pre-Cut American Visco Cannon Fuse. You can opt for 3," 4," or 6" fuse, already pre-cut for your convenience.See More Info for details, information, and helpful tips.
8 -
Plastic Rings & Washers
These plastic rings and washers will work with all the plastic ball shell sizes we sell. They may or may not work with shells purchased elsewhere.
1 Quantity = 10 Rings & Washers
-
Plastic Can (Bombette)
1 Quantity = 10 sets (20 pcs)
Approximate Attributes
Actual Diameter: 1 1/8"
Fuse Hole (Lid): 1/4"1 -
Plastic Can (3")
1 Quantity = 5 sets (10 pcs)
Approximate Attributes
Actual Diameter: 2 7/16"
Can Height: 2 1/2"
Fuse Hole (Lid): 1/8" or 1/4"1 -
Plastic Can (2")
1 Quantity = 10 sets (20 pcs)
Approximate Attributes
Actual Diameter: 1 3/4"
Can Height: 2 1/4"
Fuse Hole (Lid): 1/8" or 1/4"1 -
Plastic Can (2 1/2")
1 Quantity = 10 sets (20 pcs)
Approximate Attributes
Actual Diameter: 2"
Can Height: 2 1/2"
Fuse Hole (Lid): 1/8" or 1/4"1
151 products found
Sort by:
Name Z - A
We accept the following payment methods:
Checks and Money Orders also accepted, but must be received before orders will ship.
Returns/refunds: In the unlikely event that you are not 100% satisfied with your purchase, you are welcome to send it back within 90 days and we will issue a full refund of the product price (we do not refund shipping costs). If you need to return or exchange an item due to an error on our part, just contact us and we'll take care of you.